POLYMER FOR THE REDUCTION OF NITRATE AND PHOSPHATES
The excessive rise in the levels of nitrates and phosphates due to nutritive substances is one of the main problems linked to the maintenance of an aquarium. Both nitrates and phosphates are chemical compounds present in nature, but a high concentration in the water can be harmful to coral and other invertebrates. Nitrates and phosphates feed many forms of algae and there high concentration in the aquarium promotes the proliferation (algae bloom). REMOVER NO3 is an efficient method to reduce nitrates and phosphates in the tank. The pellets of which it is formed, creates a substrate which is preferred by this aerobic and anaerobic bacteria, which use nitrates and phosphates as nutrition, in this way, nitrates and phosphates are immobilized on the REMOVER NO3 pellets and thereby removed from the tank. REMOVER NO3can therefore be put in a Canister filter or a well aerated fluid Reactor, without any side effects for the organisms present in the aquarium: REMOVER NO3in fact, is made up of naturally biodegradable polymeric material. The surplus of bacteria which is formed on the pellets can then be eliminated using a skimmer placed at the outlet of the filter. As REMOVER NO3is used as nutrition by the bacteria colonies which grow on the surface of the pellets, it is slowly degraded in the aquarium, when the initial level of pellets has visibly decreased it is necessary to add another dose. In order to assess the optimal dose of REMOVER NO3according to the specific functions of your aquarium (dimension, density and types of fish and invertebrates) in the initial phase it is necessary to monitor the level of nitrates and phosphates frequently once REMOVER NO3has started working (typically 2-4 weeks). It is, however, important to underline that REMOVER NO3 cannot be overdosed, as the number of colonies formed on the REMOVER NO3pellets depends on the concentration of the nutrients (nitrates and phosphates) and is regulated by this.
Organic, biodegradable Polymer.
DOSES AND USE
Insert REMOVER NO3 (indicatively 50gr in 100l), in a basket filter or fluid bed and add when the initial level visibly decreases or the nitrate/phosphate levels rise. In the case of raised levels at the beginning due to undesirable species (e.g. Nitrate concentration > 20 ppm) it is necessary to introduce REMOVER NO3in steps, that is, starting with a smaller quantity (25-50% of the final volume of the filter), thereafter increasing the dose after 4-5 days. For the activation we advise the use of the biological activator BIO-EXTRA. A slight murkiness of the water in the first two days of treatment with REMOVER NO3in the tank depends on the bacterial bloom, and is not to be considered a problem.