RP Aquatics Pond Reactor

FEATURES:

• Safe start your NEW Pond.
• Removes Ammonia Spikes.
• Prevention of Ammonia Spikes at the start of season or when holding stock.
• Peace of mind whilst on Holiday.
• Ammonia Block Can be used for up to 12 weeks.

Ammonia Block is a unique premium-grade ammonia removal media.

PURPOSE:

Ammonia Block eradicates poisonous ammonia infinitely quicker than any other product on the market. New Ponds can be stocked immediately without the fear of an ammonia spike or losing fish. Simply add the correct number of PODS to your Pond Reactor and allow your filter to mature naturally over the next 12 weeks.

Compatibility

Filter types. RP build this to work with
gravity, pressure and tower filters. It is a bolt-on
media chamber rather than a filter in its own right, and it plumbs into an
existing system.

Media. It takes any of RP’s own pod media, and the
capacity and flow ceiling are the same across all of them:

• Ammonia Block: 6 pods, up to 30,000 lph
• Carbon Clear: 6 pods, up to 30,000 lph
• Phosphate Gone: 6 pods, up to 30,000 lph
• Water polishing: sponges only, up to
  30,000 lph

Note that the pond pods are a different pack from the aquarium ones: the
reactor takes six, and RP sell replacement sets sized for it.

Plumbing. It must be plumbed vertically,
and RP note it can be run on a bypass, which is the arrangement we would
recommend on any pond you cannot afford to take offline. It lets you
isolate the reactor for a pod change without stopping the filter. RP recommend
2″ flexible boot connectors for the seal and for getting it
apart again to clean, and those are not included.

Position in the system. When you are using it to safe-start
a new pond, plumb it after the biological section. See Safety
& Precautions below before you decide where it goes. On this
product that decision has consequences.

Zero running cost. There is no pump and no power in this
unit; it runs on the flow your existing filter already produces.

Safety & Precautions

Position it wrong and you can crash the filter. This is
RP’s own warning, not ours, and it is the single most important line on the
page: if the reactor is used differently from their diagrams you can cause a
filter crash, because the filter bacteria are starved of their food source, specifically when running Ammonia Block. Ammonia is the food
for the bacteria you spent a season growing. Strip it upstream of the
biological stage and the colony dies back. Plumb it after the biological
section.

Pods must lie flat. RP are explicit that the round pods
must be placed flat and not squashed up, sitting between the sponges as their
diagram shows, so that water crosses the full face of each pod.

Clean it when the flow drops. RP’s maintenance instruction
is to clean the reactor when flow becomes restricted. A chamber in
series with your filter that silts up is a chamber that is throttling the
whole system.

Mount it properly. Two brackets are supplied; RP recommend
No.10 screws to fix them, and those are not provided. A
full reactor on a vertical run is a real weight to hang off pipework
alone.

Handling the media. The pods contain ion-exchange resin.
RP’s data sheets recommend gloves, washing hands after handling, and keeping
the granules out of your eyes. They cause irritation, and their
instruction is to rinse for several minutes and seek advice if it persists.
The resins are classified as not hazardous, not harmful to plant or animal
life and not harmful to the environment. Store spare pods in a ventilated
place and never above 50 °C.

Take the media out during any pond medication, the same as
you would pull carbon. Put it back when the course is finished.

Specifications

• Type: in-line media reactor for ponds, plumbed
  into an existing filter system.
• Maximum flow: 30,000 litres per
  hour, in every media configuration RP list.
• Media capacity: 6 RP pods, or sponges for water
  polishing.
• Orientation: vertical. Not optional.
• Connections: RP recommend 2″ flexible boot
  connectors, which sets the plumbing size.
• Mounting: 2 brackets supplied; No.10 screws
  recommended and not supplied.
• Power: none. No pump, no electrical connection, no
  running cost.
• Compatible filters: gravity, pressure and tower.
• Made by: Resin Products Limited, United
  Kingdom.

We are not publishing dimensions or a weight for this, because RP
do not. There is no height, diameter, body material or dry weight in
anything they put out, and those are exactly the numbers you need to work out
whether it fits the space beside your filter. Message us before ordering and
we will measure the unit in stock. That is a better answer than a
figure copied from a reseller’s listing.

What’s in the Box

RP’s own feature list names two things in the carton beyond the reactor
itself:

• The Pond Reactor body, ready to plumb in.
• 6 Ammonia Block pods: enough media for the first
  12 weeks.
• A spanner for opening it.
• 2 mounting brackets.

The sponges are the one item we cannot pin down. RP’s
applications list refers to “7 sponges as provided”, and their installation
instruction has the pods sitting between the sponges, both of which
read as though the sponges come with it. Their headline feature list, though,
mentions only the pods and the spanner. Those two statements do not quite
agree and we are not going to resolve them by guessing. If the sponges matter
to how you plan to run it, ask us before ordering and we will open a carton
and count.

Not included: the 2″ flexible boot connectors RP
recommend, the No.10 screws for the brackets, any pipework or valves, and any
replacement pods beyond the first six. Carbon Clear and Phosphate Gone pods
for this reactor are separate purchases.

Warranty & Support

This product is covered by warranty as per the manufacturer policy, against material and manufacturing defects from the date of purchase.

Warranty support is handled by us directly. Message our WhatsApp support with your order number and we will diagnose the fault first. Most cases are solved by replacing a single part, so you rarely need to send the whole unit. If the item does need to come back, it ships to our Delhi or Pune warehouse, whichever one served your order, and courier cost in both directions is borne by the customer. Your GST invoice is valid proof of purchase for the claim.

Returns & Replacement

Returns are accepted within 7 days of delivery, provided the item is unused and in its original packaging. Manufacturer-sealed items cannot be returned once the seal is broken, and sale-priced items are not refundable.

If your item arrives defective or damaged, message us on WhatsApp with your order number, or email us if you would rather, and we will replace it. Approved replacements are delivered within 3 to 5 business days. Transit damage is covered by insurance on every shipment. If tracking shows delivered but nothing reached you, tell us within 48 hours, which is the reporting window Indian couriers allow. Damage caused during installation or use is not covered; replacement spares for such cases are chargeable.

Full terms are on our Cancellation & Returns page.