Cupramine effectively eradicates Oodinium, Cryptocaryon, Amyloodinium, Ichthyophthirius, and other ectoparasites of both freshwater and marine fish. It is superior to copper sulfate, chloride & citrate: it is non-acidic, less toxic to fish, remains in solution, and does not contaminate the filter bed. It is superior to chelates: it is fully charged (ionic), active at low concentrations, and is removable with carbon.
Sizes: 100 mL
There is more than a four-fold concentration gap between the minimal therapeutic dose (0.2 mg/L) and the toxic dose (0.8 mg/L). Cupramine is easily removable with chemical filtration. It is highly effective and safe in freshwater as well as marine water..
Remove all invertebrates. Turn off UV sterilizer; remove chemical filtration. If the bottle has a dropper cap, use 20 drops (1 mL) per 40 L (10.5 gallons*) the first day, wait 48 hours, then repeat. On non-dropper caps, each inner ring is 1 mL. In freshwater use half dose. Final copper concentration is 0.5 mg/L (0.25 mg/L in freshwater). Leave at this concentration for 14 days. Do not re-dose without testing (MultiTest: Copper). Do not use in conjunction with any other medication. Do not add reducing agents (e.g. de-chlorinators, ammonia removers) to water treated with Cupramine. If tank has ever been treated with an ionic copper (e.g. copper chloride, sulfate or citrate), test copper level after initial dosing. Although most fish tolerate Cupramine to 0.8 mg/L, it is not advisable to exceed 0.6 mg/L copper. Remove with carbon or CupriSorb
In case of eye exposure, promptly & thoroughly wash eyes with water & seek medical attention.