


In stock
This elegant, compact ISTA hanging cooling fan lowers water temperature by 2-4°C, reducing protein skimmer strain.
CHARACTERISTICS
How to use: Hang the fan outside the wall of tank; fasten it tightly with screw.
What ISTA publish for the I-104 Hanging Type Cooling Fan:
Speed 2-stage speed control
Supply DC 12 V output — low voltage, for safety in operation
Cooling reduces water temperature by 2 to 4 °C
Mounting hangs on the outside of the tank wall, fastened with a screw
Motor positioned away from the tank surface
Read the 2 to 4 degrees with ISTA’s own qualifier attached. Their catalogue states it in full as ‘reduce temperature up to 2~4 °C, higher room temperature could lower the reduction of the temperature’. That qualifier matters a great deal in India. An evaporative fan works by taking heat out of the water as water evaporates from the surface, so what it can achieve depends on the room around it: in a dry, air-conditioned room it will reach the top of that range, and in a hot, humid room in the monsoon it will do considerably less. It is not a chiller and it cannot hold a target temperature.
It will raise your evaporation rate. That is not a side effect, it is the cooling mechanism. Expect to top up more often, and remember that evaporation concentrates whatever is dissolved in the tank — top up with fresh water, not with more saltwater or more fertiliser.
What ISTA do not publish for this model:
Those rows are simply not on ISTA’s specification sheet or in their catalogue, and we would rather leave them blank than print a number we cannot source. If one of them decides your purchase, ask us and we will measure the stock item before you order.
ISTA publish those figures for their clip-on I-C816 range and not for this hanging model. If any of them decides your purchase, ask us and we will measure and read the label on the one in stock.
Check the power supply when it arrives. ISTA specify a DC 12 V output for this fan but publish no packing list, so we cannot tell you from their material whether the mains adapter is in the carton or bought separately. It is worth asking us before you order rather than discovering it on the day — a 12 V fan without its adapter does nothing.
ISTA publish no itemised scope of delivery for this product; the list above is assembled from their own product page and catalogue entry. If something is short in the carton, tell us inside the 7-day return window and we will sort it out.
Returns are accepted within 7 days of delivery, provided the item is unused and in its original packaging. Manufacturer-sealed items cannot be returned once the seal is broken, and sale-priced items are not refundable.
If your item arrives defective or damaged, message us on WhatsApp with your order number, or email us if you would rather, and we will replace it. Approved replacements are delivered within 3 to 5 business days. Transit damage is covered by insurance on every shipment. If tracking shows delivered but nothing reached you, tell us within 72 hours, which is the reporting window Indian couriers allow. Damage caused during installation or use is not covered; replacement spares for such cases are chargeable.
Full terms are on our Cancellation & Returns page.
Customer photos and videos
Verified Owner
In my planted aquarium temp was close to 30 degree now after installing this fan I could reduce it up to 28 degree on day time and 24-25 degree during night time.only draw back is it is a little bit noisy when put in high speed.I am very much satisfied with this product
Verified Owner
Promptly delivered and great service.
Verified Owner
very good air flow.but little noisy. good for small tank. will not take space above the tank. look good too.
Verified Owner
Very good model, which can be hang in the back of the tank and noise level very minimum and can decrease the water temp by 2 degree, very good for nano tank.
Verified Owner
Good performance and in fact, significant drop on water temperature by 3 to 4 deg.