300W ELECTRONIC ON/OFF THERMOSTAT

• THERMOSTATS

  300W ELECTRONIC ON/OFF THERMOSTAT

• Accurately controls terrarium temperatures.
• Ideal for use with Heat Mats and Heat Cables.
• From 20°C up to 35°C (68°F to 95°F).
• Waterproof remote sensor.
• Controls heating devices up to 100 W/ 300 W.

1. Recessed temperature setting to avoid accidental setting or tampering.
2. Waterproof remote sensor with 6 foot / 185cm probe cord.
3. Red LED heat indicator shows when heating element is ON.
4. Can be used with the following Exo Terra heating sources: Heat Mat, Heat Cable, Ceramic Heater.

Reptiles are ectotherm, and use heat from an external source to thermoregulate their optimal body temperature. Most reptiles use direct radiant heat from the sun in combination with conductive heat from sun-heated surfaces such as branches, rocks or other heat accumulating structures. Providing such an appropriate, species related, temperature gradient in the terrarium is an important factor in successful reptile keeping. With the Exo Terra 100 W/ 300 W Electronic ON/OFF Thermostat you can create a well controlled heating system that allows you to maintain the required temperature conditions similar to those found in a desert or tropical environment. The Thermostat will also help to prevent overheating and undercooling during hot summer days or cold winter nights. The electronic Triac switch keeps the temperature at the desired setpoint with a much higher accuracy compared to conventional thermostats and virtually eliminates temperature swings in the terrarium. Simply connect your Heat Mat, Heat Cable or Ceramic Heater to the Exo Terra ON/OFF Thermostat, set the preferred temperature and place the heat sensor in the desired spot. The Red LED heat indicator will light up when the heating device is ON and will shut off once the desired temperature has been reached. The recessed dial of the thermostat will prevent accidental temperature change if the device is being handled. The waterproof remote sensor can be safely used in highly moist terrariums and aquatic environments.

The Exo Terra Thermostat should be set according to the needs of the animals. Thoroughly research the preferred optimum temperature range (POTR) for your specific reptile, so you can create the correct temperature gradients inside the terrarium to allow your reptiles to thermoregulate.

Setup & Use

• Plug a Heat Mat, Heat Cable or Ceramic Heater into the thermostat, set the temperature and place the sensor where you want to control the heat.
• The setting range is 20°C to 35°C (68°F to 95°F), and it handles heating devices up to 300 W.
• The remote sensor is waterproof, with a 6 foot (185 cm) cord.
• The temperature setting is recessed, so it is hard to knock by accident.
• A red LED lights while the heater is on and goes off once the set temperature is reached.

Returns & Replacement

Returns are accepted within 7 days of delivery, provided the item is unused and in its original packaging. Manufacturer-sealed items cannot be returned once the seal is broken, and sale-priced items are not refundable.

If your item arrives defective or damaged, message us on WhatsApp with your order number, or email us if you would rather, and we will replace it. Approved replacements are delivered within 3 to 5 business days. Transit damage is covered by insurance on every shipment. If tracking shows delivered but nothing reached you, tell us within 48 hours, which is the reporting window Indian couriers allow. Damage caused during installation or use is not covered; replacement spares for such cases are chargeable.

Full terms are on our Cancellation & Returns page.