Eheim Impeller For Classic 350 / 2215
₹ 2,786
Only 2 left in stock
Frequently Bought Together
All Shipments insured against damage and loss.
This genuine EHEIM replacement impeller is a direct-fit part for its matching EHEIM Classic canister filter model.
Description
Replacement Impeller for Eheim Classic 350 / 2215
The Eheim Impeller For Classic 350 / 2215 is a replacement part for keeping your filter running at full performance — see our guide to choosing filter media for how media and hardware work together in a filtration system.
Specifications
- EHEIM order no.: 7633090
- Mains frequency: 50 Hz. EHEIM's 60 Hz version of the same part is 7633100 — this is the 50 Hz one, which is what Indian mains needs.
- Series: EHEIM list this impeller for filters from series 88011 onwards.
- Supplied as: the impeller alone. The shaft with bushings is a separate EHEIM part, order no. 7438430.
Compatibility
EHEIM list 7633090 on the spare-part sheet for the classic 350, which covers the 2215 external filter and the 1215 pump head. The classic 250 (2213) and classic 600 (2217) take different impellers — 7632600 and 7633590 respectively.
Setup & Use
Before opening the pump head: switch the filter off at the mains, close the taps or disconnect the hoses, and lift the pump head clear of the tank. Water in the canister will run back if the hoses are opened at height.
Twist the pump cover off the underside of the pump head and pull the old impeller straight off the shaft. Clean out the impeller chamber, slide the new impeller on, and refit the pump cover so it locks. Reconnect the hoses, prime the filter and switch it back on. A short burst of air noise as the last of the air clears is normal; a continuous rattle is not, and means the impeller or shaft is not seated.
Safety & Precautions
Switch the filter off at the mains and disconnect it before you open the pump head. The ceramic shaft the impeller runs on is brittle — do not lever or force the impeller on or off it. Check the two rubber bushings at the same time; a worn bushing is the usual reason a filter with a new impeller is still noisy.
Clean the impeller and its chamber with the EHEIM brush set and tank water only. No detergent, and nothing in a dishwasher. Make sure the impeller is seated fully and turns freely by hand before the pump cover goes back on, and never run the filter dry.
What's in the Box
One EHEIM impeller: the magnet and vane assembly as a single moulded part. No shaft, no bushings and no pump cover — those are ordered separately.
Returns & Replacement
Returns are accepted within 7 days of delivery, provided the item is unused and in its original packaging. Manufacturer-sealed items cannot be returned once the seal is broken, and sale-priced items are not refundable.
If your item arrives defective or damaged, message us on WhatsApp with your order number — or email us, if you would rather — and we will replace it. Approved replacements are delivered within 3 to 5 business days. Transit damage is covered by insurance on every shipment. If tracking shows delivered but nothing reached you, tell us within 72 hours, which is the reporting window Indian couriers allow. Damage caused during installation or use is not covered; replacement spares for such cases are chargeable.
Full terms are on our Cancellation & Returns page.

Fluval C3 Poly Foam Pad – 2 Pcs
Seachem Garlic Guard 250 ml
ISTA UFO Co2 Diffuser L
Korallen Zucht Pohls Coral Vitalizer 50 ml
Fluval C4 Poly Foam Pad – 3 Pcs 


I have been using Eheim Classic 350 for over a year.My impeller inner pipe is broken and damaged. I glued it with fevistick. It works but at no speed.Then I ordered a 2215 impeller at the Indiefur site. I’m not sure if it’s original or not. It comes with Ehiem brand packing. Anyway, that solves my problem. Working at super speed.Compare to other online stores, this is a good deal.Thanks to Indiefur.
Go for it working fine